It can be used in DNA sequencing, flow cytometry, cell sorting, optical instrument, spectrum analysis, interference, measurement, holography, physics experiment, etc.
Note: The laser head needs to be used on a heat sink with good heat dissipation.
-
Dimensional Drawing
Laser Head Power Supply
142.5 (L)×60(W) ×50(H) mm3, 1.0 kg
75(L) ×145(W) ×104(H) mm3, 2.3 kg
- Specifications
| Model | MSL-U-671 |
| Wavelength (nm) | 671±1 |
| Operating mode | CW |
| Output power (mW) | 1-400 |
| Power stability (rms, over 4 hours) | <1%, <2%, <3% |
| Transverse mode | TEM00 |
| Longitudinal mode | Single |
| Spectral line width (nm) | <0.00001 |
| Noise of amplitude (rms, 1Hz~20MHz) | <0.5%, <1% |
| M2 factor | <1.2 |
| Beam diameter at the aperture (1/e2, mm) | <1.0 |
| Beam divergence (mrad) | <1.5 |
| Polarization Ratio | >100:1, (Horizontal or Vertical Optional) |
| Warm-up time (minutes) | <5 |
| Pointing stability after warm-up (mrad) | <0.05 |
| Coherent length (m) | >50 |
| Beam height from base plate (mm) | 27.4 |
| Laser head consumption(W) | 15 (typical), <25 (40℃) |
| Max. Laser Head Base plate Temp (°C) | 50 |
| Operating Temperature (°C) | 10-40 |
| Power supply (90-264VAC) | PSU-H-FDA |
| Expected lifetime (hours) | 10000 |
| Warranty | 1 year |